Contact Details
- Email: jin@ochitest.com
- Phone: +86 18921375901
Metallographic Grinding & Polishing Machine PC-2VS
Dual independent workstation metallographic grinding and polishing machine with touch control, 8 fixed speeds, stepless adjustment, stable running and easy maintenance for efficient sample preparation.
The Metallographic Grinding & Polishing Machine PC-2VS is a high-efficiency dual independent workstation grinding and polishing machine for professional metallographic sample preparation. It adopts an integrated environmental protection engineering plastic body, smooth surface and scratch-resistant design. The conical disc system enables quick replacement and easy cleaning. With stepless speed regulation, 8 customizable fixed speeds, dual independent control and adjustable water flow, it provides stable, efficient and high-quality preparation for various metal and non-metal samples.
2. Key Selling Points
- Integrated environmental engineering plastic body, smooth, durable and easy to clean.
- Conical disc system for fast disc replacement and simple maintenance.
- Large-diameter drain pipe to prevent clogging.
- Stable rotation, low vibration and low noise during operation.
- Dual independent working stations for high efficiency and flexibility.
- Stepless speed regulation for precise speed control.
- 8 customizable fixed speeds for quick access to common working speeds.
- One-touch switching between grinding and polishing modes.
- Adjustable water flow for optimal grinding and polishing performance.
- Clockwise / counterclockwise rotation direction adjustable.
- Touch control panel for easy and intuitive operation.
3. Technical Parameters
| Item | Specification |
|---|---|
| Working disc diameter | 200mm (standard) / 230mm / 250mm |
| Speed range | 50–1000 r/min (constant speed & constant torque) |
| 8 fixed speeds | S1=50, S2=200, S3=300, S4=400, S5=500, S6=600, S7=800, S8=1000 r/min (customizable) |
| Rotation direction | Clockwise / Counterclockwise adjustable |
| Motor power | 1000W |
| Voltage / Frequency | AC220V 50Hz |
| Water pressure | 1–10 bar / 0.1–1 MPa |
| Inlet pipe | Φ8 mm, length 2 m |
| Drain pipe | Inner diameter Φ40 mm |
| Operation panel | Touch control + buttons |
| Operating temperature | 5–40 °C |
| Operating humidity | 0–95% RH |
| Dimensions (L×W×H) | 720×685×320 mm |
| Weight | 50 Kg |
4. Applicable Materials
Steel, stainless steel, cast iron, aluminum alloy, copper alloy, titanium alloy, cemented carbide, welded parts, castings, forgings, composite materials, ceramics, coatings, electronic materials, PCB, thin films and other metallographic samples.
5. Standard Configuration
| No. | Configuration Content |
|---|---|
| 1 | 1 set of PC-2VS main machine |
| 2 | 2 pieces of working discs (200mm standard) |
| 3 | 1 set of touch control panel |
| 4 | 1 set of conical disc system |
| 5 | 1 set of water supply & drainage system |
| 6 | 1 set of splash guard |
| 7 | 1 set of power cable |
6. Optional Accessories
- Metallographic abrasive papers (various grits)
- Polishing cloths (flannel, nylon, suede, silk, damping cloth, synthetic cloth, etc.)
- Diamond spray, suspension, polishing paste
- Alumina / silica polishing solution
- Magnetic support disc & adhesive disc
- Sample holders and clamps
- Water cooling system
7. Application Cases
- Metallographic sample preparation for automotive parts, gears, bearings, fasteners
- Aerospace alloy material grinding and polishing
- Welded structure and heat treatment sample analysis
- PCB, electronic components and connector sample preparation
- Laboratory teaching, quality control and material research
